取得ISO认证

ISO9001

适用规格 ISO9001:2015
注册编号 JUSE-RA-1701
注册组织 UNION TOOL CO. (NAGAOKA FACTORY, MITSUKE FACTORY, MISHIMA LABORATORY, HEAD OFFICE(SALES DEPARTMENT), NAGAOKA SALES OFFICE, ANJYOU SALES OFFICE, NAGOYA SALES OFFICE, OSAKA SALES OFFICE)
注册开始日 December 2, 1994
注册发行日 September 10, 2020
注册期满日 September 9, 2023
注册范围
  1. Design,Development and Manufacture of Carbide Drills for Printed Circuit Boards(including Routers),Liner Motion Guides, Carbide Endmills and Rolling Tools.
  2. Design,Development and Manufacture for Regriding of Carbide Drills for Printed Cricuit Boards.
  3. Design,Development, and Manufacture, for Regriding of Rolling Tools.
  4. Design,Development, Manufacture, Checking, Calibration, Repair of Optical Length Measuring Equipments.
  5. Design,Development, and Manufacture, Checking, Repair of Rolling Machine, Printed Circuit Boads Equipment(Drill Pointer, Ring Setting Machine).

ISO13485

适用规格 ISO13485:2016
注册编号 4200682
注册组织 UNION TOOL CO.
注册开始日 December 4, 2015
注册发行日 December 1, 2018
注册期满日 December 1, 2021
注册范围 Design and development, manufacture and the provision of customer service for ECG monitoring and receiving devices, including ECG leads, ECG application software and Motion sensing.
Detail UNION TOOL CO. 3-4-5 Sakkuratsutsumi, Nagaizumi-cho, Sunto-gun Shizuoka 411-0951
  • Manufacture of ECG monitoring and receiving devices, including ECG leads, ECG application software and Motion sensing.
UNION TOOL CO. 6-17-1, Minami-ohim Shinagawa-ku Tokyo 140-0013
  • Sales, Marketing and the provision of customer service for ECG monitoring and receiving devices, including ECG leads, ECG application software and Motion sensing.

ISO14001

适用规格 ISO14001:2015
注册编号 JUSE-EG-454
注册组织 UNION TOOL CO. (NAGAOKA FACTORY, MITSUKE FACTORY)
注册开始日 March 10, 2000
注册发行日 September 10, 2020
注册期满日 September 9, 2023
注册范围
  1. Design, Development and Manufacture of Carbide Drills for Printed Circuit Boards(including Routers), Liner Motion Guides, Carbide Endmills and Rolling Tools.
  2. Design, Development and Manufacture for Regriding of Carbide Drills for Printed Circuite Boards.
  3. Design, Development and Manufacture for Regriding of Rolling Tools.
  4. Design, Development of Optical Length Measuring Equipments.
  5. Design, Development and Manufacture, Checking, Repair of Rolling Machine, Printed Circuit Boards Equipment (Drill Pointer, Ring Setting Machine).

公司简介

联系我们CONTACT

产品相关的下载目录见此处