Troubleshooting for Re-pointing
| Find out about troubleshooting re-pointing and the effects of defective drill bits on hole quality. |
| Notice: |
| 1. In this site, "UT tolerances" are based on a ø0.30mm drill. |
| 2. "Hole qualities" explains some problems which are caused uniquely by each defective drill bit. |
| 3. "Countermeasure" assumes the use of a Union Tool MDP-10 repoint machine. |
| * Please contact us about repointing drills with a diameters of ø0.15mm or less. |
