Other Series
UC35 Series
| Characteristic | Style | Size [mm] | |
| UC35 | Importance on hole roughness | Under cut type | ø0.60-ø1.60 |
UM35 Series
| Characteristic | Style | Size [mm] | |
| UM35 | Drill for high multi layer board | Under cut type | ø0.60-ø1.60 |
UM30 Series
| Characteristic | Style | Size [mm] | |
| UM30 | Drill for Multi-Layer Bases | Under cut type | ø0.60-ø3.175 |
UM30 Series
| Characteristic | Style | Size [mm] | |
| UM30 | Drill for Multi-Layer Bases | Under cut type | ø0.60-ø3.175 |
ID30 Series
| Characteristic | Style | Size [mm] | |
| ID30 | Chip breaker / Thinning inverse drill | Inverse drill | ø3.20-ø6.5 |
ST Series
| Characteristic | Style | Size [mm] | |
| ST | The most general straight type drill | Straight type | ø0.30-ø3.175 |
SP37 Series
| Characteristic | Style | Size [mm] | |
| SP37 | Drill for paper epoxy and phenol matrixes | Straight type | ø0.60-ø1.60 |
SX24 Series
| Characteristic | Style | Size [mm] | |
| SX24 | For slot drilling | Under cut type | ø0.50-ø1.60 |
