What's New
End mills/ New Line Up |
||
| Square type end mill series for copper electrode CRN-ES | ||
 Milling Case Study CRN-ES （crn-es_e.pdf, Page3, 831KB） |
||
| Features of Series | ||
| -2/4 flutes square type for copper milling. -Available in Ø0.2-12 (2 flutes 26models), Ø3-12 (4flutes 10models). -Sharp corner edge type in corner part for high accurate finishing in corner part in material. -Coating: CRN coating, which is approved for copper milling. |
||
| Long neck corner R type end mill series for high efficient milling HLRS | ||
| R accuracy comparison HLRS （hlrs_e.pdf, Page3, 590KB） |
||
| Features of Series | ||
| -Applied tough and hard cemented carbide and HARD MAX coating for hard material. Due to HM coating, This series has remarkable heat resistance and lubricity to hard material. -Variation; 2flutes, helix; 30°, diameter; Ø0.2-Ø6.0. -The variation of corner R; R0.05, R0.1, R0.3, R0.5, R1.0. -Due to short cutting length and long neck shape, tough milling such as deep rib milling which is over cutting length is possible. -Due to helix type of rake shape in corner part, cutting performance in corner R part is remarkably improved. -The connection among axial-corner R-outer cutting edge is very smooth. -High accuracy type which doesn't make milling gap on machined surface if milling with corner R part. |
||
| Diamond coated ball type end mill series DCB/DCLB | ||
| Milling performance comparison DCB/DCLB （dcb-dclb_e.pdf, Page3, 731KB） |
||
| Features of Series | ||
| -Diamond coated 2 flutes ball series for graphite electrode work. -Line Up; All flute type DCB series ( R0.5-R6 9models), Long neck type DCLB series (R0.5-R2 8models), total 17models. -35° helix and 2flute type -Excellent anti-wear performance by newly developed diamond coating -Long life by highly adhesive diamond coat layer |
||
| 2006 INTERMOLD / AUTOMOTIVE PARTS PRODUCT SOLUTION FAIR Reference exhibition | ||
| R0.01 1flute ball type end mill （intermold2006_R0.01_e.pdf, Page1, 2.3MB）R0.02 2flute ball type end mill （intermold2006_R0.02_e.pdf, Page1, 2.3MB）cBN ball type end mill R0.5 x 2.5 （intermold2006_cBN_e.pdf, Page1, 131KB） |
||
PWB Drill/ Thank you for participating in Union Tool PWB Drill School 2006! |
||
| This year, since there were many applicants, the PWB drill school was held 3 times. The PWB drill school included domestic and overseas visitors. Every year the popularity grows as the seminar contents have demonstrations and examples from the basics of PWB drill to the latest processing methods. This is the 3rd year of holding such seminar, and about 200 visitors altogether have participated. Thank you indeed. | ||
 |
 |
|
29th, 30th Jun,2006 (Domestic visitors) |
6th, 7th Jul,2006 (Domestic visitors) |
|
 |
 |
|
13th, 14th Jul,2006 (Domestic visitors) |
30th May,2006 (Overseas visitors) |
|
Thank you very much for coming JPCA Show 2006 |
||
| We had more than 1,000 visitors into our booth for 3 days. Many thanks for all the visitors who have visited us. Date: 31st May to 2nd June, 2006 Venue: Tokyo Big Sight |
||
 |
 |
|
Union Tool Booth |
0.015mm diameter drill and ultra-micro drills |
|
| Technical data | ||
| Ultra-micro, Micro drill | ||
| High spindle speed drilling 0.05mm （jpca2006_01.pdf, Page1, 198KB）High spindle speed drilling 0.075mm （jpca2006_02.pdf, Page1, 320KB）High spindle speed drilling 0.1mm （jpca2006_03.pdf, Page1, 354KB）High spindle speed drilling 0.12mm （jpca2006_04.pdf, Page1, 313KB）High spindle speed drilling 0.15mm （jpca2006_05.pdf, Page1, 209KB）High spindle speed drilling 0.2mm （jpca2006_06.pdf, Page1, 218KB） |
||
| Automobile PWB | ||
| UA-series for PWB in automobile 0.3 to 0.75mm （jpca2006_07.pdf, Page1, 207KB） UA-series for PWB in automobile 0.8 to 1.6mm （jpca2006_08.pdf, Page1, 356KB） |
||
| Blind via hole, Back drilling | ||
| BH-series drill for blind via hole （jpca2006_09.pdf, Page1, 158KB） Back drill BD series （jpca2006_10.pdf, Page1, 362KB） |
||
| Flexible PWB | ||
| FX-series drill for flexible board 0.15 and 0.2mm （jpca2006_11.pdf, Page1, 415KB） FX-series drill for flexible board 0.3 and 0.35mm （jpca2006_12.pdf, Page1, 400KB） FX-series drill for flexible board 0.15mm （jpca2006_13.pdf, Page1, 226KB） |
||
| New type router | ||
| Improved
new tungsten carbide router for wear resistance （jpca2006_14.pdf,
Page1, 240KB）New
type router : RLE-series* （jpca2006_15.pdf, Page1, 173KB） 「* Currently Japanese market available only.」 |
||
| ID drill | ||
| ID30C series, Inverse diameter drill with thinning （jpca2006_16.pdf, Page1, 235KB） |
||
|
Read me: Handling
of PDF files
|
||
