Introduction of Router Series
PCB Drills / Routers

Routers for contour routing

RCMB/RCM series, RHM series  Standard diamond-cut type router

RCMB/RCM/RHM routers have diamond-cut geometry and can be used for contour routing on most general printed circuit boards. The design offers good swarf evacuation and long life.

*(RHMFT)

RHMFT

RCMB/RCM series,  up draft type:
The RCMB/RCM routers have a right hand, up draft design with a diamond-cut geometry.  It offers good surface finish due to its up draft swarf evacuation.  It is suitable for CNC routing machines with vacuum extraction.

SIZE:ø0.6-3.175mm

RHM series,  down draft type:
The RHM router has a left hand, down draft design with a diamond cut geometry.  It reduces surface burrs on the boards because of down cut geometry.  It is suitable for manual routing machines.

SIZE:ø0.8-3.175mm

 

SC series  Chip-breaker flute router

SC series Chip-breaker flute router

The SC router has a right hand, up draft design with a chip-breaker geometry, that chops the swarf into smaller parts and helps to reduce the radial load on the spiral flute.

It is suitable for peripheral contour routing.  And this series have a beneficial effect on burr reduction.

SIZE:ø0.6-3.175mm

 

SCMB/SCM series  Chip-breaker flute router

SCMB/SCM series Chip-breaker flute router

The SCMB/SCM routers are suitable for general routing and slitting.  It also has higher ability to resist breakage and good dimensional stability.

SIZE:ø0.8-1.8mm

 

RLE series  Chip-breaker flute router

RLE series Chip-breaker flute router

The RLE router has improved design for good swarf evacuation, and it is made from anti-wear material.  This router keeps good accuracy in long routing distance.
This router shows best performance in contour routing.

SIZE:ø1.0-2.0mm

 

Routers for slitting

RP series  Up draft 2-flute slitting router

RP series Up draft 2-flute slitting router

The RP router has a right hand, up draft design for slitting.
Because swarf is evacuated upwards, this router is suitable for CNC routing machines with vacuum extraction.

SIZE:ø0.4-3.175mm

 

RPU series  Up draft 2-flute slitting router with ULF coating

RPU series Up draft 2-flute slitting router with ULF coating

The RPU router is a ULF-coated version of RP series and the coating excels in self-lubricating performance.
This series have a beneficial effect on burr reduction, because ULF coating can prevent deposition during routing nonferrous metals such as alminum and copper.

SIZE:ø0.4-3.175mm

 

RS series  Down draft 2-flute slitting router

RS series Down draft 2-flute slitting router

The RS router has a left hand, down draft design for slitting.
It is suitable for slitting when dimensional precision is required.  It is also suitable for spot facing work to prevent burr on the board surface.

SIZE:ø0.4-3.175mm

 

Routers for soft materials

SF series  DP type single-flute router

SF series DP type single-flute router

The SF router is an up draft spiral single-flute router with a large chip pocket design.
This router prevents to rise cutting heat and provides excellent routing performance in soft materials such as Tefron and flexible boards.

SIZE:ø0.8-3.175mm

 

Cutters for spot facing

SM series  Semilunar type cutter

SM series Semilunar type cutter

The SM cutter is suitable for small spot facing on the surface of printed circuit boards for surface mounted components.
Its simple shape is suitable for the finishing of the recess face with appropriate roughness for mounting components.

SIZE:ø1.0-3.0mm

 

SI series  Straight 2-flute type cutter

SI series Straight 2-flute type cutter

The SI cutter offers improved quality of the recess surface after spot facing, and prevents surface distortion on the back side of the boards when thin boards are cutting.

SIZE:ø1.0-3.0mm

 

IC series  Taper 2-flute type cutter

IC series Taper 2-flute type cutter

The IC cutter is a two-flute cutter with a taper geometry on the tip of cutting edge. It is suitable for the bonded SMT devices. This router is also suitable for spot facing work of IC cards.

SIZE:ø1.0-3.0mm

 

Cutters for V-shape grooving

RV series  V-groove cutter

RV series V-groove cutter

The RV cutter is a V-groove cutter for standard printed curcuit boards.
It offers stable V-groove cutting without burr and unevenness.

SIZE:ø1.0-3.175mm

 

Routers for nonferrous metals

RA series  Router for nonferrous metals

RA series Router for nonferrous metals

The RA router has a sharp rake angle on peripheral cutting edge.
It is suitable for nonferrous metal such as aluminum and copper.Because the top geometry is similar to drill bit, this series can be applied to the board which needs drilling.

SIZE:ø0.8-3.0mm

 

RAU series  Router for nonferrous metals with ULF coating

RAU series Router for nonferrous metals with ULF coating

The RAU router is a ULF-coated version of RA series, and the coating  excels in self-lubricating.
This series have a beneficial effect on burr reduction, because ULF coating can prevent deposition during routing nonferrous metals such as aluminum and copper.
In addition, because the top geometry is similar to drill bit, this series can be applied to the board which needs drilling.

SIZE:ø0.8-3.0mm

 

Cutters for contour finishing

RI series  Notched straight 3-flute type cutter

RI series Notched straight 3-flute type cutter

The RI cutter has notched straight 3-flute design, and allows chips to be divided.  It is suitable for contouring the general glass epoxy boards as well as nonferrous metallic boards and offers an excellent surface finish.

SIZE:ø0.8-3.175mm

 

 

Page Top